CALL SALES (USA): +1 616 577 2345

为什么您需要电子夹具补偿?

March 24, 2020

为什么您需要电子夹具补偿?为什么不把夹具平衡到零?我们经常听到这些问题,下面就是夹具补偿的原因…

This is a question we hear a lot, and the reason is tooling compensation removes tooling unbalance and unbalance caused by eccentricity. Theoretically, once tooling compensation is carried out the rotor can be fitted to the tooling at any angular position and the unbalance measured is then the unbalance of the rotor.

A Golden rule for balancing. For every 1 micron a mass is moved off center, 1gmm of unbalance per Kg of rotor massed will be measured. So, a 10 Kg rotor moved off center 10 microns will cause 100gmm of unbalance.

So, tooling compensation electronically compensates for residual unbalance in tooling and eccentricity.

Universal Balancing offer a range of training courses for various types of roles in industry. All courses are delivered to training best practices and are designed to fit individual needs. Contact us to discuss how we can help increase the balancing knowledge of you or your team.

Go Back

We’ll contact you about rotor balance training

  • 这个字段是用于验证目的,应该保持不变。